0° Coplanar Support with Metal Structure
Flexibility and Robustness for Large Photovoltaic Installations
This model combines a concrete base with an adjustable aluminum triangular structure, allowing the tilt to be adjusted between 0° and 30° according to project needs. It is specially designed for solar farms and large ground-mounted areas where a resistant, modular, and adaptable solution is required.
Adjustable tilt to optimize photovoltaic production
DESCRIPTION:
The system consists of a reinforced concrete block and an aluminum structure onto which the solar panels are anchored.
It allows mounting two or three panels per set, in vertical or horizontal position, which facilitates adaptation to different locations, solar orientations, or technical project requirements.
WEIGHT: 52.00 kg.
ANGLE: from 0° to 30°.
APPROXIMATE PHOTOVOLTAIC PANEL DIMENSION: 105.00 cm x 210.00 cm. For larger panels, please consult our technicians.
PANEL ORIENTATION: South.
PANEL POSITION: Horizontal.
INSTALLATION SURFACE: on flat roofs (walkable or non-walkable) with a maximum slope of 10°
Advantages of Hormicad's Adjustable System
- Adaptation to any geographical area or tilt requirement
Allows adjustment of the optimal tilt according to latitude, time of year, or energy production criteria. - Structural resistance in demanding conditions
Combination of high-density concrete base and metal structure with stainless steel anchoring. - Installation without foundation
It rests directly on compacted ground, eliminating civil work times and costs.
Services included for your installation
Personalized technical advice based on location, wind, and solar orientation.
Complete technical documentation: plans, data sheet, certifications, and load calculations.
Delivery with crane and logistical coordination on site.
10-year warranty against manufacturing defects.
Recommended accessories for the 0° – 30° adjustable support
Hormicad’s adjustable support with metal structure is the most adaptable solution for flat roofs with specific solar orientation needs. To complete the installation with guarantees of durability and safety, these are the most recommended compatible accessories:
Hardware extension system: especially useful in installations with minimal tilt, it allows large-format panels to be fixed exactly at the points indicated by the manufacturer, preventing deformation.
Anti-sag system: improves module rigidity against high wind loads, ideal for installations on high or very exposed roofs.
Leveling system: allows compensating for slopes or irregularities on the roof, ensuring that the metal structure is installed precisely.
Grounding plate: incorporated into the intermediate hardware, it ensures equipotential continuity of the modules without the need for additional jumpers.
Rubber mat: recommended for smooth or waterproofed surfaces, it improves adhesion and protects the roof from possible damage.
Polyurethane adhesive: ensures a firm fixation between the support and additional accessories without the need for drilling or anchoring.
1-meter ballast with indentations (coming soon): useful for increasing the stability of the structure in installations where additional reinforcement with safe handling is required.
Discover all available accessories on our Accessories for concrete solar panel supports page
Frequently Asked Questions
Yes, the system allows modifying the tilt within the 0° to 30° range as needed.
It will depend on the technical study. In some areas, fixing with adhesive or the use of additional ballasts is recommended.
Compatible with most standard modules, up to 230 cm in length. For larger panels, please consult our technicians.
It allows installing 2 or 3 panels in each group of two supports, in vertical or horizontal position.
Request your personalized quote
Indicate the location, number of panels, and desired orientation. We will send you a technical and economic proposal within 24 hours, with all details ready for project execution.